B2218, B2219-DOOR MODULE INTERNAL - DOOR MODULE
For a complete wiring diagram Refer to Section 8W.
- When Monitored:
At all times
- Set Condition:
Whenever the module detects an EEPROM failure
| POSSIBLE CAUSES |
| DOOR MODULE |
Diagnostic Test
1. Replace the Door ModuleNOTE: Anytime this code is logged, the module must be replaced.
Repair
- Replace the appropriate Door Module.
- Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)