B1D53-SWITCH POWER SUPPLY CIRCUIT LOW - DRIVER MEMORY MIRROR MODULE
For a complete wiring diagram Refer to Section 8W.
- When Monitored:
Continuously
- Set Condition:
If the Driver Memory Mirror Module detects an internal module failure.
| Possible Causes |
| DRIVER MEMORY MIRROR MODULE |
Diagnostic Test
1. REPLACE THE DRIVER MEMORY MIRROR MODULERepair
- Replace the Driver Memory Mirror Module in accordance with the Service Information.
- Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE).