B1DA7-SWITCH POWER SUPPLY CIRCUIT LOW - PASSENGER MEMORY MIRROR MODULE
For a complete wiring diagram Refer to Section 8W.
- When Monitored:
Continuously
- Set Condition:
If the Passenger Memory Mirror Module detects an internal module failure.
| Possible Causes |
| PASSENGER MEMORY MIRROR MODULE |
Diagnostic Test
1. REPLACE THE PASSENGER MEMORY MIRROR MODULERepair
- Replace the Passenger Memory Mirror Module in accordance with the Service Information.
- Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE).