SWITCH-POWER WINDOW
REMOVAL
The driver and front passenger side power window switch is included in the window/lock switch. (Refer to 8 - ELECTRICAL/POWER LOCKS/POWER LOCK SWITCH - REMOVAL) for the service procedures.
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel (Refer to 23 - BODY/DOORS - REAR/TRIM PANEL - REMOVAL).
3. Remove switch from door trim panel.
INSTALLATION
The driver and front passenger side power window switch is included in the window/lock switch. (Refer to 8 - ELECTRICAL/POWER LOCKS/POWER LOCK SWITCH - INSTALLATION).
1. Install the switch to the door trim panel.
2. Install the door trim panel (Refer to 23 - BODY/DOORS - REAR/TRIM PANEL - INSTALLATION).
3. Connect the battery negative cable.