SPECIFICATIONS

LUBRICATION REQUIREMENTS

Body mechanisms and linkages should be inspected, cleaned, and lubricated, as required, to maintain ease of operation and to provide protection against rust and wear. When performing other under hood services, the hood latch release mechanism and safety catch should be inspected, cleaned, and lubricated. During the winter season, external door lock cylinders should be lubricated to assure proper operation when exposed to water and ice.

Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit. If necessary, a suitable solvent can be used to clean the item to be lubricated. After lubricating a component, any excess oil or grease should be removed.

LUBRICANT APPLICATION

DOOR LOCK CYLINDERS

NOTE: Do not add more lubricant.

ALL OTHER BODY MECHANISMS

LUBRICANT USAGE

ENGINE OIL

• Door Hinges – Hinge Pin and Pivot Contact Areas
• Hood Hinges – Pivot Points
• Liftgate Hinges

MOPAR® SPRAY WHITE LUBE OR EQUIVALENT

• Door Check Straps
• Liftgate Latches
• Liftgate Prop Pivots
• Ash Receiver
• Fuel Filler Door Remote Control Latch Mechanism
• Parking Brake Mechanism
• Sliding Seat Tracks
• Liftgate Latch

MOPAR® MULTIPURPOSE GREASE OR EQUIVALENT

• All Other Hood Mechanisms

MOPAR® LOCK CYLINDER LUBRICANT OR EQUIVALENT

• Door Lock Cylinders
• Liftgate Lock Cylinder

TORQUE