INSIDE HANDLE ACTUATOR
REMOVAL
1. Remove the door trim module (1), (Refer to 23 - BODY/DOORS - REAR/MODULE-DOOR TRIM - REMOVAL).
2. Disconnect the handle linkage (1).
3. Remove the screw (3) and remove the inside handle.
INSTALLATION
1. Install the handle onto the door trim panel and install the screw (3).
2. Connect the inside handle linkage (1) and (2).
3. Install the door trim module (1), (Refer to 23 - BODY/DOORS - REAR/MODULE-DOOR TRIM - INSTALLATION).