REMOVAL
GAS ENGINE
NOTE: Before proceeding, (Refer to 19 - STEERING - WARNING).
1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Remove the engine appearance cover.
3. Remove the pressure hose routing bracket bolt (2) at the upper mount (8).
4. Remove the pressure hose (3) at the pump pressure port (5).
5. Remove the hose clamp (2) securing the supply hose (1) at the pump.
6. Remove the supply hose (1) from the pump (3).
7. Remove the drive belt (2). (Refer to 7 - COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL)
8. Remove the three pump mounting bolts (1) through the pulley (3) openings.
9. Remove the power steering pump.
DIESEL ENGINE
NOTE: Before proceeding, (Refer to 19 - STEERING - WARNING).
1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Remove the engine appearance cover.
3. Remove the pressure hose routing bracket bolt (2) to the upper mount (7).
4. Remove the pressure hose (3) at the pump pressure port (4).
5. Remove the hose clamp (3) securing the supply hose (1) at the pump.
6. Remove the supply hose (1) from the pump (2).
7. Remove the drive belt. (Refer to 7 - COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL)
8. Remove the two pump mounting bolts (1) through the pulley (2) openings.
9. Remove the rear pump mounting bolt (2) behind the pump (1).
10. Remove the power steering pump (1).