SEAL-SUNROOF GLASS
REMOVAL
1. Remove sunroof glass panel (Refer to 23 - BODY/SUNROOF/GLASS PANEL - REMOVAL).
2. Place glass panel on clean work area with the top side up. Support the glass assembly from underside to avoid bending or otherwise damaging the mounting tabs.
3. Grasp the seal (1) and pull seal away from the glass panel (2). The seal is a one piece seal.
INSTALLATION
NOTE: Always position seal seam on center of the passenger side of glass panel.
1. Place seal (1) into position.
2. Seat the seal into the glass channel fully. Using care working the seal around the glass (2), being careful not to over stretch the seal while installing.
3. Install the glass panel (Refer to 23 - BODY/SUNROOF/GLASS PANEL - INSTALLATION).