SENSOR-VEHICLE SPEED
REMOVAL
1. Open hood.
2. Remove the air cleaner housing. (Refer to 9 - ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL)
3. Disconnect the speed sensor connector.
CAUTION: Clean area around speed sensor before removing to prevent dirt from entering the transaxle during speed sensor removal.
4. Remove speed sensor retaining bolt.
5. Remove speed sensor from transaxle.
INSTALLATION
1. Using a NEW o-ring, install the speed sensor to the transaxle.
2. Install the bolt and torque to 7 N·m (60 in. lbs.).
3. Connect speed sensor connector.
4. Install the air cleaner housing. (Refer to 9 - ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - INSTALLATION)