REMOVAL
PRESSURE HOSE - GEAR TO PUMP
1. Siphon the power steering fluid from the reservoir.
2. Disconnect the pressure line (2) at the pump (1).
3. Disconnect the pressure line (2) at the gear (7).
4. Remove the three mounting brackets (6) for the pressure line at the engine cradle.
5. Remove the pressure line (2) from the vehicle.
RETURN HOSE - PUMP TO COOLER
1. Siphon the power steering fluid from the reservoir.
2. Disconnect the return hose (5) at the pump (1).
3. Disconnect the return hose (5) at the cooler (4).
4. Remove the return hose (5) from the vehicle.
RETURN HOSE - GEAR TO COOLER
1. Siphon the power steering fluid from the reservoir.
2. Disconnect the return hose (3) at the fluid cooler (4).
3. Disconnect the return hose (3) at the gear (7).
4. Remove the return hose (3) from the vehicle.