B2213-CCN INTERNAL
For a complete wiring diagram Refer to Section 8W.
- When Monitored:
With the Instrument Cluster awake.
- Set Condition:
The Instrument Cluster detects an internal failure.
| Possible Causes |
| INSTRUMENT CLUSTER |
Diagnostic Test
1. VERIFY INSTRUMENT CLUSTER OPERATIONNOTE: When this DTC is active and the Instrument Cluster Backlighting is inoperative, the Instrument Cluster must be replaced.
Is DTC: B2213–CABIN COMPARTMENT NODE/CLUSTER INTERNAL active AND the Instrument Cluster Backlighting inoperative?
YES
- Replace the Instrument Cluster in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST-VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)
NO
- Disregard DTC, test complete.