INSTALLATION
LEFT SIDE
NOTE: All torques should be done with vehicle on the ground with full vehicle weight.
1. Position the lower suspension arm (9) in the frame rail.
2. Install the frame rail bracket bolt (8) and nut (1) tighten to176 N·m (130 ft. lbs.).
3. Position the lower suspension arm(3) in the axle bracket.
4. Install the axle bracket bolt (1) and nut (2) Tighten to 210 N·m (155 ft. lbs.).
5. Install the fuel tank (Refer to 14 - FUEL SYSTEM/FUEL DELIVERY/FUEL TANK - INSTALLATION).
6. Remove the supports and lower the vehicle.
RIGHT SIDE
NOTE: All torques should be done with vehicle on the ground with full vehicle weight.
1. Position the lower suspension arm (9) in the frame rail.
2. Install the frame rail bracket bolt (8) and nut (1) tighten to176 N·m (130 ft. lbs.).
3. Position the lower suspension arm(3) in the axle bracket.
4. Install the axle bracket bolt (1) and nut (2) Tighten to 210 N·m (155 ft. lbs.).
5. Remove the supports and lower the vehicle.