B1A34-UNIVERSAL GARAGE DOOR SWITCH 3 STUCK
For a complete wiring diagram Refer to Section 8W.
- When Monitored:
With the ignition on.
- Set Condition:
The Electronic Overhead Module detects the UGDO switch in the closed position for more than 2 minutes.
| Possible Causes |
| ELECTRONIC OVERHEAD MODULE |
Diagnostic Test
1. REPLACE THE ELECTRONIC OVERHEAD MODULEWhen this code is set, the Electronic Overhead Module must be replaced.
Repair
- Replace the Electronic Overhead Module in accordance with the Service Information.
- Perform BODY VERIFICATION TEST VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)