B2218-DOOR MODULE INTERNAL - DDM
For a complete wiring diagram Refer to Section 8W.
- When Monitored:
At wake up or power up.
- Set Condition:
If the Driver Door Module detects a RAM, ROM, or Checksum failure.
| Possible Causes |
| DRIVER DOOR MODULE |
Diagnostic Test
1. REPLACE THE DRIVER DOOR MODULERepair
- Replace the Driver Door Module in accordance with the Service Information.
- Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)