B2219-DOOR MODULE INTERNAL - PDM
For a complete wiring diagram Refer to Section 8W.
- When Monitored:
At wake up or power up.
- Set Condition:
If the Passenger Door Module detects a RAM, ROM, or Checksum failure.
| Possible Causes |
| PASSENGER DOOR MODULE |
Diagnostic Test
1. REPLACE THE PASSENGER DOOR MODULERepair
- Replace the Passenger Door Module in accordance with the Service Information.
- Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)