B221D-(RSM) RAIN SENSOR MODULE INTERNAL
For a complete wiring diagram Refer to Section 8W.
- When Monitored:
With the ignition on.
- Set Condition:
The Rain Sensing Module detects an internal failure.
| Possible Causes |
| RAIN SENSING MODULE |
Diagnostic Test
1. REPLACE THE RAIN SENSING MODULEWith the scan tool, read RSM DTCs.
Is DTC: B221D-(RSM) RAIN SENSOR MODULE INTERNAL active?
Yes
- Replace the Rain Sensing Module in accordance with the Service Information.
- Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)
No
- Test complete.