TRAILER HITCH
REMOVAL
1. Remove the tow hooks, if equipped (Refer to 13 - FRAME & BUMPERS/FRAME/REAR TOW HOOK - REMOVAL).
2. Disconnect trailer electrical connector.
3. Support the hitch with a suitable lifting device.
4. Remove the bolts and remove the trailer hitch.
INSTALLATION
1. Support the hitch with a suitable lifting device and install the hitch.
2. Install the bolts (1) and tighten to 88 N·m (65 ft. lbs.)
3. Connect the electrical connector.
4. Install the tow hooks, if required (Refer to 13 - FRAME & BUMPERS/FRAME/REAR TOW HOOK - INSTALLATION).