CAPACITOR-IGNITION COIL
DESCRIPTION
One coil capacitor is used. It is located in the engine compartment and attached (clipped) to a wiring trough near the brake power booster.
OPERATION
The coil capacitor(s) help dampen the amount of conducted electrical noise to the camshaft position sensor, crankshaft position sensor, and throttle position sensor. This noise is generated on the 12V supply wire to the ignition coils and fuel injectors.
REMOVAL
The coil capacitor is located in the engine compartment and is attached (clipped) to a wiring harness trough near the brake power booster (graphic not available).
1. Unclip capacitor from wiring harness trough.
2. Disconnect electrical connector at capacitor.
INSTALLATION
1. Connect electrical connector to coil capacitor.
2. Position capacitor into v-clip on wiring harness trough.