CD CHANGER MECHANICAL FAILURE
For a complete wiring diagram Refer to Section 8W
- When Monitored:
Continuously with the ignition and CD Changer turned on.
- Set Condition:
The code will set if the CD Changer detects a mechanical failure.
| Possible Causes |
| INTERNAL FAILURE |
Diagnostic Test
1. INTERNAL FAILURENOTE: Erase DTC and attempt to reset. If DTC resets, follow this test.
This is an internal CD Changer failure.
View repair
Repair
- Replace the CD Changer.
- Perform BODY VERIFICATION TEST - VER 1.