CD CHANGER READ FAILURE
For a complete wiring diagram Refer to Section 8W
- When Monitored:
Continuously with the ignition and CD Changer turned on.
- Set Condition:
The code will set if a CD that is not formatted as a music CD is installed in the CD Changer.
| Possible Causes |
| CD CHANGER READ FAILURE |
Diagnostic Test
1. CD CHANGER READ FAILUREReplace the problem CD with a good, clean, unscratched, music CD.
Turn the radio on and select the good CD.
With the Scan Tool , read DTC's.
Does the Scan Tool display CD CHANGER READ FAILURE?
Yes
- Replace the CD Changer.
- Perform BODY VERIFICATION TEST - VER 1.
No
- Test Complete.