CD CHANGER TEMPERATURE HIGH
For a complete wiring diagram Refer to Section 8W
- When Monitored:
Continuously with the ignition and CD Changer turned on.
- Set Condition:
The code will set if the temperature inside the CD Changer is above +65° C (+145° F).
| Possible Causes |
| HIGH TEMPERATURE FAILURE |
Diagnostic Test
1. HIGH TEMPERATUREWith the Scan Tool, erase the audio DTC's.
Start the engine and allow the engine to reach normal operating temperature.
If the vehicle has been in the hot sunlight or extreme cold move the vehicle indoors and open the doors to allow the inside temperature to stabilize.
The CD Changer will operate between -23° C and 65° C (-10° F and +145° F).
With the Scan Tool, read DTC's.
Does the Scan Tool display CD CHANGER TEMPERATURE HIGH?
Yes
- Replace the CD Changer.
- Perform BODY VERIFICATION TEST - VER 1.
No
- Test Complete.