CD PLAY FAILURE
For a complete wiring diagram Refer to Section 8W
- When Monitored:
Continuously with the ignition and the radio CD player turned on.
- Set Condition:
The code will set if a CD that is not formatted as a music CD or is scratched, dirty so the radio can not play the CD.
| Possible Causes |
| CD PLAY FAILURE |
Diagnostic Test
1. CD PLAY FAILUREReplace the problem CD with a good, clean, unscratched, music CD.
Turn the radio CD player on.
With the Scan Tool, read DTC's.
Does the Scan Tool display CD PLAY FAILURE?
Yes
- Replace the Radio.
- Perform BODY VERIFICATION TEST - VER 1.
No
- Test Complete.