DOOR GLASS
REMOVAL
1. Place the glass (1) in the position shown to gain access to the glass connections (2) from behind the waterdam.
2. Disconnect and isolate battery negative cable.
3. Remove the waterdam, (Refer to 23 - BODY/DOOR - FRONT/WATERDAM - REMOVAL).
4. Depress the lock tabs (2) and release the glass (3) from the regulator (1) lift plate.
5. Rotate the top of the glass toward the front and remove the glass from the window opening.
INSTALLATION
1. Install the glass through the window opening and align the mounting plate to the lift plate.
2. Slide glass (3) down into the door and connect the mounting hole (2) to the regulator lift plates (1).
3. Install the waterdam, (Refer to 23 - BODY/DOOR - FRONT/WATERDAM - INSTALLATION).