P1101-ACM CRASH SIGNAL RECIEVED

For a complete wiring diagram Refer to Section 8W

Diagnostic Test

NOTE: This DTC indicates that the vehicle safety system has deployed the airbag(s).

Turn the ignition on.
With the scan tool, erase ECM DTCs.

NOTE: If this DTC sets again inspect the ACM Signal circuit between the ECM harness connector and the ACM harness connector for an intermittent short to ground.

View repair.

Yes

Test complete.

Perform the ECM Verification Test Ver. 1 (Refer to 9 - ENGINE - DIAGNOSIS AND TESTING).