STABILIZER BAR
REMOVAL
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the upper stabilizer link bolts at the stabilizer bar (1).
4. Remove the stabilizer bar bushing clamps (2) from the frame .
5. Remove the stabilizer bar (1) from the vehicle.
INSTALLATION
1. Install the stabilizer bar (1) to the vehicle.
2. Install the stabilizer bar bushing clamps (2). Tighten the nuts to 149 N·m (110 ft.lbs.).
3. Install the upper stabilizer link bolts and washer at the stabilizer bar (1). Tighten the bolt to 136 N·m (100 ft.lbs.).
4. Install the tire and wheel assembly. (Refer to 22 - TIRES/WHEELS/WHEELS - STANDARD PROCEDURE).
5. Lower the vehicle.