AIRBAG LAMP OPEN
For a complete wiring diagram Refer to Section 8W.
- When Monitored:
With the ignition in the Run/Start position.
- Set Condition:
The Instrument Cluster detects Indicator short/open fault during internal self test.
| Possible Causes |
| INSTRUMENT CLUSTER |
Diagnostic Test
1. INSTRUMENT CLUSTERWith the scan tool, erase DTCs.
Turn the ignition off, wait 10 seconds, then turn the ignition on.
With the scan tool, read DTCs.
When this code is set, the Instrument Cluster must be replaced.
Yes
- Replace the Instrument Cluster in accordance with the Service Information.
- Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)
No
- Test Complete.