GLOVE BOX
REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions. (Refer to 23 - BODY/INSTRUMENT PANEL - WARNING)
2. Open the glove box.
3. Squeeze the stop tabs located on the sides of the box and allow the box to open fully.
4. With box in the full down position slide the box to the right off of the hinges and remove.
INSTALLATION
1. Before proceeding with the following repair procedure, review all warnings and cautions. (Refer to 23 - BODY/INSTRUMENT PANEL - WARNING)
2. Position the box on and slide the box to the left to engage the hinges.
3. Close the glove box.