REMOVAL
3.7L
1. Siphon out as much power steering fluid as possible.
2. Remove the serpentine drive belt (Refer to 7 - COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL).
3. Remove the power steering high pressure hose at the pump.
4. Remove the return hose at the pump.
5. Remove the three bolts (1) securing the pump to the engine thru the holes in the pulley (3).
6. Remove the pump from the vehicle.
2.8L- DIESEL
1. Siphon out as much power steering fluid as possible.
2. Remove the engine cooling fan.
3. Remove the fan shroud
4. Remove the serpentine drive belt.
5. Remove the three bolts (5) securing the pulley (4) to the pump (2).
6. Remove the power steering hoses (1).
7. Remove the three bolts (3) securing the pump (2) to the bracket.
8. Remove the pump from the vehicle.