OCCUPANT CLASSIFICATION UNDETERMINED STATUS

• When Monitored:

  With the ignition on.

• Set Condition:

  The Occupant Classification Module (OCM) broadcasts a status message on the Bus that provides classification and system fault data to the Occupant Restraint Controller (ORC). Both the OCM and the ORC will set this DTC if an active fault in the Occupant Classification System (OCS) affects occupant classification determination.

NOTE: Diagnose and repair all other active OCM DTCs except INTERROGATE OCM before diagnosing this DTC. Refer to the Table of Contents in this section for a complete list of airbag system diagnostic procedures.

Perform SYSTEM VERIFICATION REQUIRED test.