SPECIFICATIONS
TORQUE - GAS
DESCRIPTION |
N-m |
Ft. Lbs. |
In. Lbs. |
| Starter Solenoid Battery Cable Nut |
11 |
- |
100 |
| Starter Mounting Bolts - 2.4L |
54 |
40 |
- |
| Starter Mounting Bolts -3.7L |
54 |
40 |
- |
| Starter Heat Shield Mounting Bolts |
6 |
- |
55 |
TORQUE - DIESEL
DESCRIPTION |
N-m |
Ft. Lbs. |
In. Lbs. |
| Starter Solenoid Battery Cable Nut |
11 |
- |
100 |
| Starter Mounting Bolts |
27 |
20 |
- |
STARTING SYSTEM - 3.7L
| Starter Motor |
||
| Engine Application |
3.7L |
|
| Power Rating |
1.2 Kilowatt |
|
| * Cranking Amperage Draw Test |
100 - 200 Amperes |
|
| * Test at operating temperature. Cold engine, tight (new) engine, or heavy oil will increase
starter amperage draw. **The starter is equipped with permanent magnets. Never strike the starter case to attempt to loosen a sticking/stuck armature as permanent magnets may crack or break. |
||
STARTING SYSTEM - 2.8L DIESEL
| Starter Motor |
||
| Engine Application |
2.8L Diesel |
|
| Power Rating |
2.2 Kilowatt |
|
| * Cranking Amperage Draw Test |
500 Amperes |
|
| * Test at operating temperature. Cold engine, tight (new) engine, or heavy oil will increase starter
amperage draw. |
||