COOLER-TRANSMISSION
DESCRIPTION
The automatic transmission cooler is located in the front of the condenser and behind the front fascia. The transmission cooler is a heat exchanger that allows heat in the transmission fluid to be transferred to the air passing over the cooler fins.
The transmission oil cooler for the 2.8L Diesel with automatic transmission integrated into the A/C condenser.
The Transmission oil cooler assembly is equipped with quick connect fitting for the transmission oil cooler lines.
REMOVAL
1. Remove electric cooling fan (Refer to 7 - COOLING/ENGINE/RADIATOR FAN - REMOVAL).
2. Position cooling fan out of the way.
3. Remove the transmission cooler line retaining block nut.
4. Remove transmission cooler lines from transmission lines.
5. Using Tool 8875A, disconnect transmission cooler tube from the transmission (Refer to 7 - COOLING/TRANSMISSION - STANDARD PROCEDURE).
6. Remove the transmission cooler mounting bolts.
7. Remove transmission cooler from vehicle.
INSTALLATION
1. Position transmission cooler in vehicle.
2. Install transmission mounting bolts. Tighten to 14 N·m (123 in. lbs.)
3. Install transmission cooler lines into the transmission. (Refer to 7 - COOLING/TRANSMISSION - STANDARD PROCEDURE).
4. Install transmission cooler lines into transmission
5. Install locking plate and nut. Tighten nut to 22.5 N·m (200 in. lbs.)
6. Install electric cooling fan (Refer to 7 - COOLING/ENGINE/RADIATOR FAN - INSTALLATION).