*INTRUSION TRANSCEIVER MODULE SENSITIVITY (EXPORT ONLY)
For a complete wiring diagram Refer to Section 8W
| Possible Causes |
| INTRUSION TRANSCEIVER MODULE (ITM) PROGRAMMED WITH INCORRECT INTERIOR TYPE |
Diagnostic Test
1. VERIFY THE ITM IS PROGRAMMED WITH THE CORRECT INTERIOR TYPEWith the scan tool, verify that the ITM is programmed with the correct interior type.
Is the ITM programmed with the correct Interior Type?
Yes
- Test Complete.
No
- Program the ITM with the correct interior type.
- Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE).