SIDE RAIL WEATHERSTRIP/RETAINER
REMOVAL
1. Remove the windshield weatherstrip retainer. (Refer to 23 - BODY/WEATHERSTRIP/SEALS/WINDSHIELD A-PILLAR WEATHERSTRIP/RETAINER - REMOVAL)
2. Remove the two screws.
3. Using a trim stick C-4755 or equivalent, release the push in fasteners and remove the weatherstrip.
INSTALLATION
1. Position the weatherstrip and seat the push in fasteners.
2. Install the two screws.
3. Install the windshield weatherstrip. (Refer to 23 - BODY/WEATHERSTRIP/SEALS/WINDSHIELD A-PILLAR WEATHERSTRIP/RETAINER - INSTALLATION)