B1A23-RKE RECEIVER PERFORMANCE - WCM
For a complete wiring diagram Refer to Section 8W.
- When Monitored:
Continuously.
- Set Condition:
When the Wireless Control Module senses that the RKE signal is jammed, this code will set.
| Possible Causes |
| EXTERNAL ENVIRONMENT |
Diagnostic Test
1. TEST FOR INTERMITTENT CONDITIONTurn the ignition on.
With the scan tool, record and erase DTC's
Turn the ignition off.
Operate the RKE transmitter in all positions several times.
Turn the ignition on.
With the scan tool, read DTC's.
Are there any door lock related trouble codes present or is the RKE inoperative?
Yes
- Refer to the symptom list for problems related to Power Locks.
No
- The conditions that caused this code to set are not present at this time. This DTC is set when the vehicle is parked in a location that is affected by external environmental conditions. Suggest to the customer that they park in a slightly different location from where the RKE was inoperable.