REMOVAL
FRONT
1. Remove wheel and tire assemble.
2. Remove caliper (1). (Refer to 5 - BRAKES/HYDRAULIC/MECHANICAL/DISC BRAKE CALIPERS - REMOVAL).
3. Remove retainers securing rotor to hub studs .
4. Remove rotor (3) from hub.
5. If rotor shield requires service, remove front hub and bearing assembly.
REAR
1. Raise and support the vehicle
2. Remove the tire and wheel assembly.
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securely.
3. Remove the disc brake caliper adapter (2) (Refer to 5 - BRAKES/HYDRAULIC/MECHANICAL/DISC BRAKE CALIPER ADAPTER - REMOVAL).
4. Remove the retaining clips and rotor assembly.