2012 Jeep Wrangler JK Factory Service Manual 06 - Clutch

PEDAL AND PAD, Clutch

REMOVAL

REMOVAL

  1. Remove steering column lower cover and knee blocker for access.

    2.  
  2. Disengage clutch master cylinder actuator to pedal pivot.

    3.  
  3. Remove nuts attaching pedal and bracket to dash panel and upper cowl support.

    4.  
  4. Separate pedal assemble from vehicle.

    5.  

INSTALLATION

INSTALLATION

  1. Place clutch pedal and bracket over studs on dash panel and cowl support. Install nuts and tighten to 39 N·m (29 ft. lbs.).

    2.  
  2. Engage clutch master cylinder actuator on brake pedal pivot.

    3.