C1078-TIRE REVOLUTIONS RANGE PERFORMANCE
C1078-TIRE REVOLUTIONS RANGE PERFORMANCE
For a complete wiring diagram, refer to the Wiring Information.
-
When Monitored:
Continuously.
-
Set Condition:
A comparison between the tire circumference value contained in the EEPROM and the tire circumference value received on the CAN bus. Programmed value for the tire size is not within acceptable range.
Possible Causes |
|---|
| INCORRECT VALUE PROGRAMMED INTO TOTALLY INTEGRATED POWER MODULE (TIPM) |
INCORRECT VALUE PROGRAMMED INTO TIPM
TIRE SIZE |
BODY STYLE |
ENGINE SIZE |
SALES CODE |
TIRE DIAMETER (MM) |
|---|---|---|---|---|
| P225/75R 17 BSW ALL TERRAIN | JK | ALL | TNA | 2480 |
| P225/70R 18 BSW ON/OFF ROAD | JK | ALL | TNB, TT6 | 2480 |
| P225/75R 16 BSW ON/OFF ROAD | JK | ALL | TRM | 2253 |
| LT225/75R 17 BSW OFF ROAD | JK | ALL | TT7 | 2495 |
| P225/75R 17 OWL ON/OFF ROAD | JK | ALL | TUF | 2480 |
| P245/75R 16 BSW ON/OFF ROAD | JK | ALL | TYX, TYZ | 2357 |
Verify that the correct Tire/wheel information is programmed in the Totally Integrated Power Module (TIPM).
Is the correct value programmed in the TIPM according to the chart?
Yes
- Test complete.
- Perform the ABS VERIFICATION TEST. (Refer to 28 - DTC-Based Diagnostics/MODULE, Antilock Brake (ABS) - Standard Procedure).
No
- Program the correct Tire/Wheel information in the TIPM.
- Perform the ABS VERIFICATION TEST. (Refer to 28 - DTC-Based Diagnostics/MODULE, Antilock Brake (ABS) - Standard Procedure).