B222C-VEHICLE CONFIGURATION NOT PROGRAMMED
B222C-VEHICLE CONFIGURATION NOT PROGRAMMED
For a complete wiring diagram, refer to the Wiring Information.
Possible Causes |
|---|
| TIPM |
| 1. | Turn the ignition on. |
| 2. | With the scan tool, read DTCs. |
Does the scan tool display this DTC as active?
Yes
- Go To 2
No
| 1. | Cycle the ignition from off to run remaining in run. |
| 2. | With the scan tool, read DTCs. |
Does the scan tool display this DTC as active?
Yes
- Go To 3
No
| 1. | Turn the ignition on. |
| 2. | With the scan tool, read DTCs. |
Is DTC: B2206-CURRENT VIN MISSING / MISMATCH also active?
Yes
- Refer to repair procedure for DTC-B2206-CURRENT VIN MISSING / MISMATCH. (Refer to 28 - DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Diagnosis and Testing)
No
- Replace the TIPM in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST. (Refer to 28 - DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Standard Procedure)