B1A11-RKE FOB 2 BATTERY LOW
B1A11-RKE FOB 2 BATTERY LOW
For a complete wiring diagram, refer to the Wiring Information.
-
When Monitored:
Continuously.
-
Set Condition:
When the Wireless Control Module (WCM) senses that the RKE transmitter signal is not as strong as it ought to be, this code will set.
Possible Causes |
|---|
| LOW BATTERY |
| RKE TRANSMITTER |
TEST FOR INTERMITTENT CONDITION
| 1. | Turn the ignition on. |
| 2. | With the scan tool, record and erase DTCs |
| 3. | Operate the RKE transmitter in all positions several times. |
| 4. | With the scan tool, read DTCs. |
Does the scan tool display this DTC as active?
Yes
- Replace the RKE transmitter battery and retry the system. If the DTC returns, replace and program the RKE transmitter in accordance with Service Information.
- Perform the BODY VERIFICATION TEST. (Refer to 28 - DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Standard Procedure)
No
- The conditions that caused this code to set are not present at this time.
- Perform the BODY VERIFICATION TEST. (Refer to 28 - DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Standard Procedure)