C2312-TRAC/ESP OFF SWITCH STUCK

For a complete wiring diagram, refer to the Wiring Information.

When Monitored:
With the ignition on.
Set Condition:
The Cluster detects the TRAC/ESP Off Switch active for greater than 20 seconds.

Possible Causes
LOWER SWITCH BANK

CHECK FOR AN ACTIVE DTC

1.	Turn the ignition on.

2.	Press the TRAC/ESP Off Switch three times.

3.	With the scan tool, read DTCs.

Does the scan tool display this DTC as active?

Yes

Replace the Lower Switch Bank in accordance with the Service Information.
Perform the BODY VERIFICATION TEST. (Refer to 28 - DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Standard Procedure).