B1424-IMPROPER DVD-WRONG REGION

For a complete wiring diagram, refer to the Wiring Information.

When Monitored:
Continuously with the ignition on and the Radio/DVD player turned on.
Set Condition:
The code will set if a DVD is not formatted for the proper region or the Radio/DVD player is programmed for the incorrect region.

Possible Causes
DVD READ FAILURE

1. CHECK THE DVD

1.	Replace the problem DVD with a DVD formatted for the proper region.

2.	Turn the Radio/DVD player on.

3.	With the scan tool, read DTCs.

Does the scan tool display active: B1424-IMPROPER DVD-WRONG REGION?

Yes

2. RADIO/DVD PLAYER

1.	With the scan tool, verify the Radio/DVD player is programmed for the proper region.

2.	With the scan tool, read DTCs.

Does the scan tool display active: B1424-IMPROPER DVD-WRONG REGION?

Yes

Eject the inoperative DVD and replace the Radio/DVD player in accordance with the Service Information.
Perform the BODY VERIFICATION TEST. (Refer to 28 - DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Standard Procedure).