PLATE, Skid, Transfer Case

• REMOVAL
• INSTALLATION

REMOVAL

REMOVAL

1. Raise and support the vehicle, (Refer to 04 - Vehicle Quick Reference/Hoisting - Standard Procedure) .

 
2. Remove the crossmember bolts (2).

 
3. Remove the bracket bolts (3) and remove the transfercase skid plate (4).
   

 

INSTALLATION

INSTALLATION

1. Install the skid plate (4).

 
2. Install the bracket bolts (3) and tighten to 65 N·m (48 ft. lbs.).

 
3. Install the crossmember bolts (2) and tighten to 65 N·m (48 ft. lbs.).