2014 Jeep Wrangler JK Factory Service Manual 17 - Rear Suspension

BUMPER, Jounce

DESCRIPTION

The jounce bumpers are mounted outside the coil spring to the frame rail.

OPERATION

The jounce bumpers are used to limit suspension travel in compression.

REMOVAL

  1. Raise and support the vehicle.

    2.  
  2. Pry the jounce bumper out of the cup.

    3.  
  3. Remove the jounce bumper.

    4.  

INSTALLATION

  1. Install the jounce bumper into the cup by pushing upwards until fully seated.

    2.  
  2. Remove the supports and lower the vehicle.

    3.