B2206-CURRENT VIN MISSING / MISMATCH
For a complete wiring diagram, refer to the Wiring Information.
-
When Monitored:
With the ignition on.
-
Set Condition:
A Powertrain Control Module (PCM) from another vehicle has been installed in the vehicle.
Possible Causes |
|---|
| PCM FROM ANOTHER VEHICLE INSTALLED |
1. PCM FROM ANOTHER VEHICLE INSTALLED
| NOTE: | This Diagnostic Trouble Code (DTC) is set when a PCM from another vehicle is installed into the current vehicle. |
Has another PCM been installed?
Yes
- Replace the Powertrain Control Module in accordance with the Service Information.
- Perform the POWERTRAIN VERIFICATION TEST. (Refer to 28 - DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Standard Procedure).
No
- Go To 2
2. OTHER CAN-C MODULES SET VIN MISMATCH
Is VIN Mismatch DTC set in other CAN-C modules?
Yes
- Replace the Powertrain Control Module in accordance with the Service Information.
- Perform the POWERTRAIN VERIFICATION TEST. (Refer to 28 - DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Standard Procedure).
No
- Replace the Totally Integrated Power Module in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST. (Refer to 28 - DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Standard Procedure).