2014 Jeep Wrangler JK Factory Service Manual 28 - DTC-Based Diagnostics

B2215-FCM INTERNAL (TOTALLY INTEGRATED POWER MODULE)

For a complete wiring diagram, refer to the Wiring Information.

When Monitored:
Continuously.
Set Condition:
The Totally Integrated Power Module (TIPM) detects an internal fault.

Possible Causes
TOTALLY INTEGRATED POWER MODULE (TIPM)

REPLACE THE TOTALLY INTEGRATED POWER MODULE IF DTC IS ACTIVE

1.	With the scan tool, read the active DTCs.

Does the scan tool display this DTC as active?

Yes

Replace the Totally Integrated Power Module in accordance with the Service Information.
Perform the BODY VERIFICATION TEST. (Refer to 28 - DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Standard Procedure).

No

Test complete, the condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals, and correct pin tension.