B1424-IMPROPER DVD-WRONG REGION
For a complete wiring diagram, refer to the Wiring Information.
-
When Monitored:
Continuously with the ignition on and the Radio/DVD player turned on.
-
Set Condition:
The code will set if a DVD is not formatted for the proper region or the Radio/DVD player is programmed for the incorrect region.
Possible Causes |
|---|
| DVD READ FAILURE |
| 1. | Replace the problem DVD with a DVD formatted for the proper region. |
| 2. | Turn the Radio/DVD player on. |
| 3. | With the scan tool, read DTCs. |
Does the scan tool display active: B1424-IMPROPER DVD-WRONG REGION?
Yes
- Go To 2
No
| 1. | With the scan tool, verify the Radio/DVD player is programmed for the proper region. |
| 2. | With the scan tool, read DTCs. |
Does the scan tool display active: B1424-IMPROPER DVD-WRONG REGION?
Yes
- Eject the inoperative DVD and replace the Radio/DVD player in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST. (Refer to 28 - DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Standard Procedure).
No