2014 Jeep Wrangler JK Factory Service Manual 19 - Steering

SHROUD, Steering Column, Upper

REMOVAL

  1. Remove the three screws attaching the lower shroud (2) to the column.

    2.  
  2. Separate the lower shroud (2) from the upper shroud (1) by pressing on the edges of the shrouds.

    3.  
  3. Remove the upper shroud (1) from the lower shroud.

    4.  

INSTALLATION

  1. Install the upper shroud (1) to the lower shroud (2) clipping the shrouds to one another.

    2.  
  2. Install the three screws attaching the lower shroud (2) to the column.

    3.