2014 Jeep Wrangler JK Factory Service Manual 13 - Frame and Bumpers

PLATE, Skid, Transfer Case

REMOVAL

  1. Raise and support the vehicle, (Refer to 04 - Vehicle Quick Reference/Hoisting - Standard Procedure) .

    2.  
  2. Remove the crossmember bolts (2).

    3.  
  3. Remove the bracket bolts (3) and remove the transfercase skid plate (4).

    4.  

INSTALLATION

  1. Install the skid plate (4).

    2.  
  2. Install the bracket bolts (3) and tighten to 65 N·m (48 ft. lbs.).

    3.  
  3. Install the crossmember bolts (2) and tighten to 65 N·m (48 ft. lbs.).

    4.