FRONT STABILIZER BAR > INSTALLATION

1. INSTALL FRONT STABILIZER BAR BUSHING LH

2. INSTALL FRONT STABILIZER BAR BUSHING RH

3. INSTALL FRONT STABILIZER BAR

4. INSTALL FRONT SUSPENSION MEMBER BRACE

5. TEMPORARILY INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

6. CONNECT FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

7. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

8. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

9. INSTALL FRONT WHEELS

10. STABILIZE SUSPENSION

11. FULLY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

12. INSTALL NO. 1 ENGINE UNDER COVER

13. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT