RADIATOR > INSTALLATION

1. INSTALL RADIATOR ASSEMBLY

2. INSTALL NO. 2 FAN SHROUD

3. CONNECT NO. 3 WATER BY-PASS HOSE

4. CONNECT NO. 1 WATER BY-PASS HOSE

5. CONNECT NO. 5 INVERTER COOLING HOSE

6. CONNECT NO. 1 RADIATOR HOSE

7. CONNECT NO. 2 RADIATOR HOSE

8. INSTALL RADIATOR SUPPORT CUSHION

9. INSTALL HOOD LOCK SUPPORT SUB-ASSEMBLY

10. INSTALL NO. 1 INVERTER BRACKET

11. INSTALL COOL AIR INTAKE DUCT RETAINER SUB-ASSEMBLY

12. INSTALL HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch)

13. INSTALL HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch)

14. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

15. INSTALL HIGH PITCHED HORN ASSEMBLY

16. INSTALL LOW PITCHED HORN ASSEMBLY

17. INSTALL FRONT BUMPER ASSEMBLY

18. INSTALL AIR CLEANER CASE

19. INSTALL INLET AIR CLEANER ASSEMBLY

20. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

22. ADD COOLANT (for Engine)

23. INSPECT FOR COOLANT LEAK (for Engine)

24. INSTALL NO. 1 ENGINE UNDER COVER

25. INSTALL RADIATOR SUPPORT OPENING COVER

26. INSTALL INVERTER COVER ASSEMBLY LH (w/ Cover)

27. INSTALL NO. 2 CYLINDER HEAD COVER

28. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

29. INSTALL DECK FLOOR BOX RH

30. INSTALL REAR NO. 3 FLOOR BOARD

31. INSTALL REAR DECK FLOOR BOX

32. INSTALL REAR NO. 2 FLOOR BOARD

33. ADJUST MILLIMETER WAVE RADAR SENSOR (w/ Dynamic Radar Cruise Control System)